Assessment Validation and You: Steps to Validate Assessments

Assessment Validation and You: Steps to Validate Assessments

Blog Article

RTOs face many tasks after registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation is typically the most daunting.

While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.

To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.

Clause 1.8 in the SRTOs 2015 outlines that RTOs must ensure their assessment systems, including RPL, comply with training package requirements and the Principles of Assessment and Rules of Evidence.

The standards require RTOs to perform two types of validation.

The first type of validation ensures that your RTO's assessment meets the requirements of the training package within your scope.

The subsequent validation confirms that assessments are conducted according to the principles of assessment and rules of evidence.

This shows that validation happens pre- and post-assessment. We will focus on the first type—assessment tool validation.

A Look at the Two Types of Assessment Validation

Decoding Assessment Validation

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation or assessment tool validation focuses on the first part of the clause, ensuring that all unit requirements are met and that workbooks are entirely compliant.

On the other hand, post-assessment validation deals with implementation, ensuring Registered Training Organisations follow the Principles of Assessment and Rules of Evidence.

In this write-up, we will focus on assessment tool validation.

Methods for Conducting Assessment Tool Validation

Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.

Optimal Timing for Assessment Tool Validation

Assessment tool validation is intended to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.

Hence, whenever new learning resources are bought, assessment tool validation should be carried out before students use them.

You don’t need to wait until the next scheduled validation in your 5-year cycle. Immediately validate new resources to ensure they’re ready for student use.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- your resources get updated
- you add new training products on scope
- when course is reviewed against training product updates
- identifying your learning resources as a risk during your risk assessment

ASQA applies a risk-based approach to regulate RTOs, expecting regular risk assessments. Hence, student complaints about learning resources are a good opportunity for assessment tool validation.

Which Training Products to Validate?

Remember, this validation aims to ensure all learning resources are compliant before use. All RTOs are expected to validate all unit resources.

Necessary Resources for Assessment Tool Validation

Training Materials

To validate your assessment tools, you will need the complete set of your learning resources:

Mapping tool – the first document to review. It indicates which assessment items meet unit requirements, aiding in faster validation.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – ensure sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – these might include checklists, registers, and templates developed separately from the workbook and marking guide. Ensure they are appropriate for the assessment task and meet unit requirements.

Assessment Validation Team

Clause 1.11 describes the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs often require all trainers and assessors to be present, occasionally including industry experts.

Your validation panel must, as a group, possess:

Vocational competencies and current industry skills that relate to the unit being validated

Up-to-date knowledge and skills in vocational teaching and learning

Any one of the following training and assessment qualifications:

TAE40116 Certificate IV in Training and Assessment or its successor

Assessment validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool supports the validation process and documentation. It simplifies understanding how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can act as evidence that you have validated your resources before they are used by students.

Although ASQA does not recommend or require a specific template for assessment tool validation, numerous templates can be found online. These tools typically have validators examine the tools holistically to determine if they meet the principles of assessment.

Assessment Principles Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.

It is highly advisable to use a more detailed template for evaluating each unit requirement and its corresponding assessment items. Below is an example:

Element Performance Criteria Assessment Directions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What to Check?

As highlighted in our blog post Common Problems In Assessment Tools, it is essential that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Assessment Core Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?

Flexibility – Does the assessment accommodate different options to demonstrate competence according to various needs and preferences?

Validity – Does the assessment measure what it is supposed to measure? Is it a valid tool for evaluating the required skill or knowledge?

Reliability – Will the assessment achieve the same results every time, regardless of who conducts the training? Will different assessors consistently make decisions on skill competence?

Essential Rules of Evidence

Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence sufficient to ensure the learner has the required skills and knowledge?

Authenticity – Is the assessment tool ensuring that the work is the candidate’s own?

Currency – Do the assessment tools correspond to current units of competency and industry practices?

Although these are commonly addressed in VET professional development and nationally recognised training, a lot of tools still fail to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Show What You Mean

Observe the verbs in the unit requirements and ensure they are addressed by the assessment item. For example, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Complete each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

change diapers

prepare bottle, bottle feed babies and clean equipment

prepare solid food and feed babies

respond suitably to infant signs and cues

prepare and settle infants for rest

monitor and encourage age-appropriate physical exploration and gross motor skills

Getting students to describe changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless the requirement assesses underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Mind the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

All or Nothing

Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Could You Be Clearer?

Each assessment item must include clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Hence, ensure your instructions are clear and not confusing for students or assessors. For instance:
What kind of information can be included in a work package?
What can be included in a work package?

The answer may include:

Necessary materials

Relevant costs

Activity duration

Allocated duties and responsibilities

When an assessment item demands multiple answers, indicate website the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.

The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:

Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.

Answers could include, but are not limited to:

Weather conditions – isolating the work area, engineering controls, personal protective equipment

Work area and ground conditions – elimination, isolation, use of engineering controls

People – isolation, engineering, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolation, engineering, administration

Equipment or machinery – isolating, use of engineering controls, administrative controls

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Seeing these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees mean you must wait for an audit to rectify noncompliance. This affects your compliance history, so it’s wiser to take a safe and compliant approach.